Nostalgia sobre trilhos - Schienenzeppelin

[cataclism2]

Olá, pessoal... navegando pela internet, olha o que eu achei... provavelmente o primeiro TGV do mundo, feito na Alemanha... segue o link com vídeo e o artigo do Wikipedia (em inglês):

http://br.youtube.com/watch?v=XEIk7OIGWFE

Schienenzeppelin
From Wikipedia, the free encyclopedia

The Schienenzeppelin or rail zeppelin was an experimental railcar which resembles a zeppelin airship in appearance. It was designed and developed by the German aircraft engineer Franz Kruckenberg in 1929. Propulsion was by means of an airplane propeller located at the rear, and only a single example was ever built.

History

The train was built at the beginning of 1930 in the Hannover-Leinhausen works of the German Imperial Railway "Deutsche Reichsbahn" company. The work was completed by autumn of the same year. The train was 25.85 m long and had just two axles, with a wheelbase of 19.6m. The height was 2.8 meters. As originally built it had a BMW VI 12 cylinder petrol aircraft engine of 600 horse power driving a four-bladed (later two-bladed), fixed pitch wooden (ash tree) propeller. The driveshaft was raised 7 degrees above the horizontal to give the vehicle some downwards thrust. The chassis of Schienenzeppelin was designed aerodynamically having some resemblance to the era's popular Zeppelin airships and it was built in aircraft style to reduce weight. The interior of the railcar was spartan and designed in Bauhaus-style.

On May 10th 1931, the train exceeded a velocity of 200 km/h for the first time. Afterwards, it was exhibited to the general public throughout Germany. On 21 June 1931 the train set a new world railway speed record of 230 km/h on the route Berlin-Hamburg between Karstädt and Dergenthin, which was not surpassed by any other train until 1954. The railcar still holds the land speed record for a petrol powered rail vehicle This high speed was attributable, amongst other things, to its low weight, which was only 20.3t (metric).

In 1932 Kruckensberg began a new project with the rail car involving significant modifications. It was cut just behind the forward wheels and received a complete new front end with a two-axle bogie, resembling the later 137 155 railcar. The rear single axle remained as it was. The modifications were completed by November 1932. The aircraft engine was still used, however, the power transmission was hydraulic through two Fottinger- Fluid drives for both directions of travel, these were fitted on the forward bogie. A pointed fairing was installed in place of the propeller. These changes meant that the earlier 1-1 wheel arrangement was replaced by B-1 with the front axle replaced by a powered bogie.This version of the vehicle reached 180km/h at the beginning of 1933.

Due to many problems with the Schienenzeppelin prototype, the Deutsche Reichsbahn-Gesellschaft decided to go their own way in developing a high speed railcar. In 1933 the DRG built a high-speed railcar of their own design and called it Fliegender Hamburger (Flying Hamburger). DRG's new design was suitable for regular service and served also as the basis for later railcar developments. However, many of the Kruckenberg ideas, based on the experiments with Schienenzeppelin and high speed rail travel, found their way later to DRG's railcar designs.

At the beginning of 1934 the train was rebuilt for the last time, and a Maybach GO 5 engine was installed. In July 1934 it was sold to the "Deutsche Reichsbahn" (German Imperial Railway) company for 10,000 Reichsmarks. Five years later, in 1939 the rail zeppelin was finally dismantled because its material was needed by the German army.

The failure of Schienenzeppelin has been attributed to everything from the dangers of using an open propeller in crowded railway stations to fierce competition between Kruckenberg's company and the Deutsche Reichsbahn's separate efforts to build highspeed railcars.

Limitations

One disadavantage of the rail zeppelin was the inherent difficulty of pulling additional wagons to form a train, because of its construction. Furthermore, the train could not use its propeller to climb steep gradients, as the flow would separate when full power was applied. Thus an additional means of propulsion was needed for such circumstances.

Model railway

A model of the Schienenzeppelin in Z scale from Märklin companySeveral versions of the Schienenzeppelin have been produced by the German model railway manufacturer Märklin, in Z scale and H0 scale. The only true-to-original version is the Z scale model, produced as a limited production run in 1982 to celebrate the 10th anniversary of the Z scale


Me impressionou o design frontal dele, muito à frente de seu tempo!!! :o